I have Valley Faucets in my bathrooms. One of them started leaking. After much searching, i found the O-ring and Cartridge. I replaced these on the faucets and leaking has stopped.
However, in this process, the part in which cartridge is installed got rotated. So now my handle is not aligned properly. Usually, it moves from the horizontal position to vertical in the middle. But now, the handle is pointing backwards at about 60 degree angle. For full water, the position is about 30 degree in the front.
It works but looks very strange. I have no experience in doing plumbing work and will appreciate any help you can provide to fix this. Essentially, if i can rotate the part in which cartridge is installed then it will fix the problem. I just don't know how to do it.
If it is confusing or you need more information then please let me know.