Redwood
Master Plumber
The gasket compresses when you tighten the screws
Tub shoe washer/gasket
- Thread starter JMattero
- Start date
Users who are viewing this thread
I've tightened the screws, but with the gasket in place, the barrel doesn't stop the water from draining. Would a different size or type of gasket have a different thickness? Can I just use caulk (e.g., a non-silicone like Polyseamseal Tile & Tub Adhesive Caulk)? Thanks.
Sponsor
Paid Advertisement
Redwood
Master Plumber
If the barrel isn't stopping the water from draining then the linkage for the barrel needs adjusting.
It's nothing to do with the gasket...
It's nothing to do with the gasket...
Redwood
Master Plumber
Phew! Finally got on the same page!
Similar threads
