(206) 949-5683, Top Rated Plumber, Seattle
Results 1 to 3 of 3

Thread: pipe replacement question...

  1. #1

    Default pipe replacement question...

    Hi, I am new here, and not at all knowlegdable about plumbing.

    That being said I have an issue with correcting a prblem cause by replacing some shower fixtures and installing a new shower surround this past weekend. The problem is that I accidentally cut a pipe and had to try and use a coupling to correct it. Well, that didn't work. It seemed to work through testing, but after a day under pressure a leak developed (after the surround was installed, closing up my access to the pipe).

    Now that the direct access is closed up, I have limited space to work with the leaky pipe. it is now all surrounded by wood framing and built-in drawer setups. Trying to resolder the coupling has resulted in more leaks, or "roaming" leaks. The space is so limited that I'm having a hard time getting enough heat to get the solder to flow around to where I can't get the torch (without setting the house ablaze).

    What I would like to do is cut the copper pipe further down the line where there is more room, and use a compression fitting that I would then screw on a flexhose (metalbraided pipe thing) to meet up with the central valve.

    This would alleviate working with a torch in close quarters and my fears about causeing major damage. My question is, would this work??
    Can I use a compression valve on my copper piping that has a flexhose threaded on the other end, that flexhose then threaded onto the main valve?

    I thank anyone ahead of time for any help you can provide, again, I know little about this sort of thing.

    -Arashi

  2. #2
    Plumber jimbo's Avatar
    Join Date
    Aug 2004
    Location
    San Diego
    Posts
    9,001

    Default

    You cannot use either a compression fitting nor any kind of flexible lines inside the walls. Sorry to be the bearer of bad news, but this will be sight unseen for 20+ years, and even a little drip can destroy the house in that time.

  3. #3

    Default

    Thanks Jimbo, I guess I will have to go with a more labor intensive solution.

    thanks again, I appreciate it.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •