1994 Three Handle Tub/Shower

Users who are viewing this thread

Yardjockey

New Member
Messages
4
Reaction score
0
Points
0
Hi Folk! - I think my Model number for this three-handle is 83267. The booklet I have sez Model Series 83000. The diverter is worn. Lots of water comes out of the spout when mostly all of it should be sent to the shower head. Looking for the correct number for the diverter has been a trying affair. MOEN said they would call me back in an hour, suppliers I contact from on-line info say that the part numbers and model numbers seem to change rapidly and not to order from them until MOEN has assured me of my most correct model number! YIKES!! I pulled the diverter and sure enough the rear barrel portion of it is worn. I was also told the drawings MIGHT look like the part I'm holding in my hand, but it ain't necessarily so! Now I need a part number so I can order it. Or.... can I get some help from someone with an logical alternative to dealing with MOEN directly? Looking foward to hearing from you! --- EdP
 

Patrick88

Plumber
Messages
832
Reaction score
0
Points
16
Location
Webster Ma.
I would take the part to a moen supplier and say "This is what I need". It is hard not to figure it out then.
 

Yardjockey

New Member
Messages
4
Reaction score
0
Points
0
Thanks for the response. MOEN suggested a local True Value store. No deals there. They suggested a local plumbing outfit. Hmmmm. The chase is on! I put everything back together so's I could take a shower this morning. I'll get used to this one of these days! --- EdP
 
Top
Hey, wait a minute.

This is awkward, but...

It looks like you're using an ad blocker. We get it, but (1) terrylove.com can't live without ads, and (2) ad blockers can cause issues with videos and comments. If you'd like to support the site, please allow ads.

If any particular ad is your REASON for blocking ads, please let us know. We might be able to do something about it. Thanks.
I've Disabled AdBlock    No Thanks