(206) 949-5683, Top Rated Plumber, Seattle
Results 1 to 4 of 4

Thread: Shower Valve Stems Too Short

  1. #1

    Default Shower Valve Stems Too Short

    Hello. We recently installed new tile in a customer's shower surround. We also replaced his old shower vavle with a new one. After installing the backerboard and tile, we discovered that the stems for the hot and cold handles are a little short so we can't install the new handles. The handles are held on by a small allen/hexhead screw.

    Is there a way to extend these stems a little bit so we can get the handles on? The new valve is not a name brand. It was purchased off of ****.

    Thanks for any advice or help!

    TitansFan

  2. #2
    Consultant cwhyu2's Avatar
    Join Date
    Aug 2007
    Location
    Cincinnati OH
    Posts
    1,330

    Default

    Faucet was roughed in Improperly.You may have to maybey find stem exstenders but I doubt it.No brand faucets cause prblems as you cant find
    parts for them.

  3. #3
    Senior Robin Hood Guy Ian Gills's Avatar
    Join Date
    Jul 2007
    Location
    USA
    Posts
    2,781

    Default

    If you can find them, plastic extenders are not the way to go (they break). My advice would be to find another faucet that has longer stems.

    Price Pfister seem to have the longest, but check the specs.

    Alternatively, you may be able to push the pipes *a little* to expose enough of the stem if there is any room to move.

    I had exactly the same problem. No doubt a 1950s house with thick concrete around the bath. They do not build them like that anymore.
    Last edited by Ian Gills; 12-10-2007 at 02:45 PM.

  4. #4
    Moderator & Master Plumber hj's Avatar
    Join Date
    Aug 2004
    Location
    Cave Creek, Arizona
    Posts
    25,655

    Default faucet

    It may not be a "name brand" but does it have a name?

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •