(206) 949-5683, Top Rated Plumber, Seattle
Results 1 to 2 of 2

Thread: shower base installation

  1. #1

    Default shower base installation

    Hello! I am installing a mustee shower base (32x48) onto a concrete floor. The drain pipe is sticking straight out of the concrete. The problem is that the bottom of the base is not flat. It has about a 4" deep protrusion where the pipe goes in the center of the base. The instructions say that if installing onto a wood floor that I must cut a 5" hole to accomodate this protrusion. Should I chisel out the concrete aroiund the pipe or would I be better off just getting a different base?

  2. #2
    Forum Admin, Expert Plumber Terry's Avatar
    Join Date
    Aug 2004
    Location
    Bothell, Washington
    Posts
    14,202
    Blog Entries
    1

    Default

    You will need to break out some concrete.
    It's the same with any pan.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •