buderus wall-hung won't fire

Users who are viewing this thread

shenelec

New Member
Messages
3
Reaction score
0
Points
0
I have a Buderus GB-142, installed about a year and a half ago. Thanksgiving morning, it was reading error code 6A, which means it tried to fire 3 times and then gave up. Turning the power off and back on reset the system and solved the problem for the time being.
Today, it's off again. Now, the boiler makes this gurgling noise, as if there's air in the system, while it tries to fire. After 3 tries, it kicks out again.
So, while I'm waiting for the plumber who installed the system to answer his pager, I wonder if you can help a poor electrician diagnose this problem.
Pressure reads 20psi
I'm thinking I should purge it somehow, but do I need to drain the whole system? It's radiant plus dhw.
Thanks for any advice.
 

shenelec

New Member
Messages
3
Reaction score
0
Points
0
no heat; help!

House temperature is dropping through the 50's; any help appreciated.
 

BigLou

New Member
Messages
138
Reaction score
0
Points
0
What was blocked the condensate line or the vent it self ? I would have mentioned that it won't fire if the vent was blocked but I have ben busy in my basement installing a new GB142. how do you like it ?

Lou
 
Top
Hey, wait a minute.

This is awkward, but...

It looks like you're using an ad blocker. We get it, but (1) terrylove.com can't live without ads, and (2) ad blockers can cause issues with videos and comments. If you'd like to support the site, please allow ads.

If any particular ad is your REASON for blocking ads, please let us know. We might be able to do something about it. Thanks.
I've Disabled AdBlock    No Thanks