Fubar411
New Member
Okay, I've been watching this forum for awhile, and many questions have been answered. I haven't seen my particular question. I am doing a bathroom with laundry in my house. I get a little confused with the venting requirements on the toilet and how to connect it into the waste. The sink and laundry drain and venting, I get. I'm doing those based on a lot of post reading. However, because I don't want to cut into my nice 10x2 joists, I was hoping to not have to vent the toilet. It is within 6' of the venting, as this is a small room. But would I have to worry about the solid waste causing a problem as I enter the main stack?
Attached is a pretty crude drawing, the sink and laundry are vented/drained properly. I'm just concerned with how the toilet joins up and is vented. The whole room is 7' x 10'
Thank you so much!
-Rob
Attached is a pretty crude drawing, the sink and laundry are vented/drained properly. I'm just concerned with how the toilet joins up and is vented. The whole room is 7' x 10'
Thank you so much!
-Rob