(206) 949-5683, Top Rated Plumber, Seattle
Results 1 to 10 of 10

Thread: Furring out rafters

Hybrid View

  1. #1
    DIY Senior Member nelsonba's Avatar
    Join Date
    Sep 2005
    Location
    Minnesota
    Posts
    116

    Default Furring out rafters

    I'm planning to fur out 2x4 rafters with 2x2s to make room for more insulation. Can I nail them or do I need to use screws? I'll be covering them with drywall. Do I need to use longer drywall screws?

  2. #2
    Retired Defense Industry Engineer jadnashua's Avatar
    Join Date
    Sep 2004
    Location
    New England
    Posts
    21,412

    Default

    I'd slap some construction adhesive on and screw them together. Nailing a 2x4 could be bouncy, screwing would be more direct. You'd be less likely to split things if you drilled through the 2x2 first.
    Jim DeBruycker
    Important note - I'm not a pro
    Retired Defense Industry Engineer; Schluter 2.5-day Workshop Completed 2013, 2014

  3. #3

    Default

    Since it's furring I'd use a finish nailer. You're going to run screws through it while doing the drywall so I wouldn't bother doing to much work to keep the furring in place. You need to have a screw into the joist 1/2". Do the math to figure out what length screw you'll need for your drywall. I'd bet a 1 5/8" would do you fine.

    Tom

  4. #4
    Retired Defense Industry Engineer jadnashua's Avatar
    Join Date
    Sep 2004
    Location
    New England
    Posts
    21,412

    Default

    1/2 drywall + 1.5" 2x2 (maybe more), need at least a 2.5" screw. If the 2x2 isn't tight, the screw for the drywall may not catch right away and then it will jack the two apart. WIth a bead of construction adhesive there, it won't move. If you've got a nailer, then I'd forgo the screws, but still slap some glue up there.
    Jim DeBruycker
    Important note - I'm not a pro
    Retired Defense Industry Engineer; Schluter 2.5-day Workshop Completed 2013, 2014

  5. #5
    DIY Senior Member Livin4Real's Avatar
    Join Date
    Sep 2007
    Location
    Indianapolis, IN
    Posts
    192

    Default

    Quote Originally Posted by statjunk View Post
    Since it's furring I'd use a finish nailer. You're going to run screws through it while doing the drywall so I wouldn't bother doing to much work to keep the furring in place.

    Tom
    I don't know anyone that uses 2.5" drywall screws, most are 1.25" so the furring strips must be securely attached to the rafter because the drywall screws aren't going to penetrate the actual rafter, just the furring strip unless of course you want to drop twice as much money on the extra long screws to do all the drywall with.
    Helpful Guides

  6. #6
    In the Trades AZ Contractor's Avatar
    Join Date
    Apr 2007
    Location
    Phoenix, AZ
    Posts
    90

    Default

    I always over-engineer things planning for the worst.

    I would glue and screw the furring strips and nail some gussets on them in various locations.

    A little extra work can make a huge difference.

  7. #7

    Default

    Yup missed the furring strip size. When I think furring I'm thinking thin. Yeah you'll need longer screws.

    Any reason you don't just sister up the joists?

    Tom

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •