I want to use a Fleck 5600 valve on a 10x47 tank with 1 cubic foot of MTM
(I have a Pot Perm tank and necessary connection parts). In the past the 5600 was on a 10x47 tank with 1 cubic foot of softening resin.
The 5600 currently has an injector nozzle undrilled, a #1 white injector throat, a 2.4gpm D.L.F.C. button, and what I assume is a .50 B.L.F.C. button (it is VERY small and has 170 50 F written on it). Would these parts work? Thanks in advance for any advice!