Chassis
Engineer
I will install new baseboards in a bathroom remodel project. The plan is to use a built-up design including painted S4S pine as the base, with a base cap on top of the S4S.
Question: My door casing is about 9/16" thick. Am I making a trim carpentry faux pas by using the heavy S4S base? I may have to bevel or chamfer the raw end of the base where it meets the door casing, to give a finished look. Anyone seea problem with this plan? Thanks for any comments.
Question: My door casing is about 9/16" thick. Am I making a trim carpentry faux pas by using the heavy S4S base? I may have to bevel or chamfer the raw end of the base where it meets the door casing, to give a finished look. Anyone seea problem with this plan? Thanks for any comments.