How can I find the happy medium between the forced air furnace and radiant heat floor (Wirsbo)? I have exparimented with the thermostats both digital and dial, but neither is the same. It seems that the forced air takes over when the floor should be heating and when the floor is heating the forced air is running too. It does not seem very efficient. One more thing...which is more accurate a digital wirsbo thermostat or the standard honeywell dial thermostat?? If the wirsbo thermostat reads 68 degrees the honeywell dial can read 63-64 degrees. I have a digital indoor/outdoorthermometer and that is completely different as well! I forgot to mention that the thermostats are fairly near each other on inside walls. Any help or thought would be greatly appreciated. Thanks Joe