(206) 949-5683, Top Rated Plumber, Seattle
Results 1 to 6 of 6

Thread: Odd readings replacing an outlet.

  1. #1

    Default Odd readings replacing an outlet.

    Hi, I just moved into a house that I'm renting and I'm replacing some of the outlets as they are old 'double-t' style ones. The wiring is armor clad and I'm using self-grounding outlets. The first two I did went fine. Normal readings from hot to ground and neutral to ground. I just did one in the kitchen, though, and I'm getting around 13V-14V hot to ground and about 23V-24V neutral to ground. There are four outlets total on this circuit and I get about the same readings when I tested two of the old outlets, using the plate screw as ground. Now, the fridge is also on this circuit and is plugged into the one outlet I haven't tested yet. Could the fridge be causing these readings? I haven't tried to take a reading yet w/the fridge unplugged. I'm using a Craftsman digital multimeter.

  2. #2
    Licensed Electrical Contractor Speedy Petey's Avatar
    Join Date
    Jun 2007
    Location
    NY State, USA
    Posts
    975

    Default

    Do you own this place? Or are you the renter?

    If you are the renter is it 99.9% likely that you are NOT legally allowed to do ANY electrical work there.
    You are opening yourself up to some SERIOUS liability.

  3. #3
    Plumber jimbo's Avatar
    Join Date
    Aug 2004
    Location
    San Diego
    Posts
    9,001

    Default

    You have an open circuit, possibly an open ground or open neutral. A load ( like a light bulb or refrigerator) can contribute to seemingly un-natural voltage readings, because they provide a path for current flow, in an open circuit completed by the very presence of the meter.

    A digital meter can also cause what are known as "phantom voltage" readings, due to its very high input impedance.

    To trouble shoot this, you need to understand the circuit and how the loads can affect readings. For starters, if you remove all possible loads ( lights, refrigerators, coffee pot, etc.). Then determine if the open is the ground, the neutral, or possibly the hot.

  4. #4
    In the Trades Bob NH's Avatar
    Join Date
    Oct 2005
    Location
    New Hampshire
    Posts
    3,307

    Default

    Plug an incandescent light into an outlet towards the far end of the circuit and turn it on. Then measure hot to neutral. You should have something near 120 Volts.

    Then measure hot to ground. If you don't get the same reading then you probably have an open ground.

    Measure neutral to ground. If you don't get zero volts you almost certainly have an open ground.

  5. #5
    In the Trades
    Join Date
    Oct 2007
    Location
    N.E. Ohio
    Posts
    1

    Default

    Quote Originally Posted by 73Electra225
    Hi, I just moved into a house that I'm renting and I'm replacing some of the outlets as they are old 'double-t' style ones. The wiring is armor clad and I'm using self-grounding outlets. The first two I did went fine. Normal readings from hot to ground and neutral to ground. I just did one in the kitchen, though, and I'm getting around 13V-14V hot to ground and about 23V-24V neutral to ground. There are four outlets total on this circuit and I get about the same readings when I tested two of the old outlets, using the plate screw as ground. Now, the fridge is also on this circuit and is plugged into the one outlet I haven't tested yet. Could the fridge be causing these readings? I haven't tried to take a reading yet w/the fridge unplugged. I'm using a Craftsman digital multimeter.
    Do you guys think this is a good way to measure a circuit?

  6. #6
    Electrical Contractor/Instructor jwelectric's Avatar
    Join Date
    Jun 2007
    Location
    North Carolina
    Posts
    2,522

    Default

    Quote Originally Posted by Michael15956
    Do you guys think this is a good way to measure a circuit?

    Yes



    .

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •