(206) 949-5683, Top Rated Plumber, Seattle
Results 1 to 5 of 5

Thread: Alternative to 1.6 gallon toilet tanks?

Hybrid View

  1. #1

    Default Alternative to 1.6 gallon toilet tanks?

    We are completely fed up with the commodes in our house. If they can be repaired then no local plumber we know is able to do the right kind of magic. Am I right to assume that the bigger the tank on the commode, the better it flushes? I am vastly less concerned at this point about my water bill than I am about the enormous (expensive) overhead we suffer from constantly wasting our valuable time unstopping commodes.

    Thanks,
    - John Strong (pluviosilla@gmail.c

  2. #2
    In the Trades Gary Swart's Avatar
    Join Date
    Sep 2004
    Location
    Yakima WA
    Posts
    7,246

    Default

    I will venture a couple of guesses here. Are your 1.6 toilets are "builder models" that are frequently installed by contractors when the house was build? Or, are they first generation 1.6 units which were fraught with problems? Or, are they units you purchased from a Big Box Store? If any of these are true, that's your problem. You need to replace them with quality units.

  3. #3
    Geologist sjsmithjr's Avatar
    Join Date
    Dec 2005
    Location
    Knoxville, Tennessee
    Posts
    295

    Default

    I have lived in a two bedroom, one bath house with a wife, a daughter, and a Toto Drake 1.6 gpf toilet for two years now. I have yet to plunge the toilet. Trust me - with two females and one toilet, a man takes no chances with the builder's grade or big box toilets Gary refers to.

    A co-worker of mine, with a wife, a daughter, and two sons, replaced all of his toilets repaced with Toto 1.6 gpf toilets last year. He tells me he hasn't plunged since.

    -Sam

  4. #4
    Moderator & Master Plumber hj's Avatar
    Join Date
    Aug 2004
    Location
    Cave Creek, Arizona
    Posts
    25,679

    Default toilets

    It is the quality of the toilet, not the gpf, that determines how it flushes. But you had better get used to 1.6 gpf toilets, because that is all you can buy, other than some 1.3 gpf models California is experimenting with.

  5. #5
    Plumber jimbo's Avatar
    Join Date
    Aug 2004
    Location
    San Diego
    Posts
    9,001

    Default

    1.6 is in the target sights of the water savers. 1.3 and 1.0 GPF models are available . I don't know if they work, but how long can it be until they are mandated?

    A good "class 5" flusher or a pressure assist model will be quite satisfactory.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •