I had a faucet installed in my remodeled bathroom by a plumber...however, I now have an issue. The hot water is only coming out of the faucet.
I took the face plate off and closed the hot check valve and completely opened the cold. Nothing, no cold water. I loosened the cylinder a little and sure enough water came out, which I quickly re-tightened.
The cold water line to the faucet is also attached to the kitchen faucet, where I am getting cold water.
Any thoughts?
I would go back to the plumber expect, he burned a hole in my tub since he didn't use a drop cloth....and we agreed he wouldn't get paid.
I took the face plate off and closed the hot check valve and completely opened the cold. Nothing, no cold water. I loosened the cylinder a little and sure enough water came out, which I quickly re-tightened.
The cold water line to the faucet is also attached to the kitchen faucet, where I am getting cold water.
Any thoughts?
I would go back to the plumber expect, he burned a hole in my tub since he didn't use a drop cloth....and we agreed he wouldn't get paid.