Shower handle

Users who are viewing this thread

susantm

New Member
Messages
1
Reaction score
0
Points
0
I have a shower handle that was installed (maybe not the correct way). When you go to turn it on it moves either right or left, however the water is either hot or cold...nothign in between. Any suggestions???? HELP. :eek:
 

perrycat

New Member
Messages
39
Reaction score
0
Points
0
Just a shot in the dark, because you didn't give much info for what type shower valve, but it sounds like what the guy or gal put in was a new cartridge, and it sounds like maybe it's not referenced or whatever to where OFF is, and where cold and hot are......just a guess but it sounds like you're talking about a Moen PosiTemp maybe.
If you know anything about what you're doing, turn off the water (to the whole house), take it apart (the shower valve), and re install it (the cartridge and handle)....better yet...just get a new cartridge because that one's probably screwed up now.....but if you don't know really, you're going to mess it up and it costs about $700 to put in a new shower valve, as opposed to about $230 to get a plumber out and put a new cartridge in...so if you mess it up, you could really cost yourself alot more money.
 
Top
Hey, wait a minute.

This is awkward, but...

It looks like you're using an ad blocker. We get it, but (1) terrylove.com can't live without ads, and (2) ad blockers can cause issues with videos and comments. If you'd like to support the site, please allow ads.

If any particular ad is your REASON for blocking ads, please let us know. We might be able to do something about it. Thanks.
I've Disabled AdBlock    No Thanks