Driven well pipe removal

Users who are viewing this thread

abellettiere

New Member
Messages
1
Reaction score
0
Points
0
Does anyone know of a way to retrieve broken pipe in a driven well? I was replacing an existing well with new pipe and point and had a fitting crack about 15' down leaving 2 lengths of 5' pipe and new point down.
 

Speedbump

Active Member
Messages
4,511
Reaction score
12
Points
38
Location
Riverview, Fl.
If you had a set of jars and a taper tap, you might get it out. If sand and gravel fall down on top of the jars while your working you could lose them too.

If it were mine, I would just move over with all new equipment and keep the joints butted and tight by turning the pipe with a big pipe wrench quite often.

bob..
 
Top
Hey, wait a minute.

This is awkward, but...

It looks like you're using an ad blocker. We get it, but (1) terrylove.com can't live without ads, and (2) ad blockers can cause issues with videos and comments. If you'd like to support the site, please allow ads.

If any particular ad is your REASON for blocking ads, please let us know. We might be able to do something about it. Thanks.
I've Disabled AdBlock    No Thanks