(206) 949-5683, Top Rated Plumber, Seattle
Results 1 to 4 of 4

Thread: The leak that I created

  1. #1
    DIY Junior Member mln's Avatar
    Join Date
    Jul 2007
    Location
    New Jersey
    Posts
    15

    Default The leak that I created

    I'm trying to hook up the ice maker in a new refrigerator. I didn't use a saddle valve. It didn't seem like a good idea. So I tee'd off an existing 5/8" line just downstream of a valve.

    First problem was the valve which didn't completely shut the water off.
    I cut about an inch of line away and put in it's place a T with two 5/8" connections in line and the quarter inch connection for the ice maker on the third side.

    Things seemed to be going smoothly until I tightened up one of the 5/8" connections. It didn't seem like I was anywhere near overtightening it and then I heard a snap. The small collar that contacts the copper line partially split away from the body of the T connection. Now there is a very slow leak there, I'm concerned about tightening it further and I don't know how to fix it. The ferrule is likely fused to the pipe and as I cut the pipe midway along a linear run, I can't cut away the portion with the ferrule as it will no longer meet up with the T.

    Is there a sensible way to fix this? or should I just come to terms with the fact that I'm in over my head and I should hire someone who knows what they're doing??

  2. #2
    Retired Defense Industry Engineer jadnashua's Avatar
    Join Date
    Sep 2004
    Location
    New England
    Posts
    21,412

    Default

    It's likley 1/2" pipe, which is about 5/8" OD. You can buy a ferrule puller. It sort of looks like a gear puller which should pull that ferrule off. Sounds like you had a defective ferrule. Kind of strange, unless it was made in China - they have problems with tempering and alloying metals.

    If the ferrule actually split, you should be able to wrestle it off without a puller, though. You could have split the nut, too, but if so, you still need to get the ferrule off to put a new one on. The compression fitting doesn't need to be super tight. It needs to be tight enough so it doesn't spin, but not so tight that you compress the pipe so it is crimping the pipe a lot.
    Jim DeBruycker
    Important note - I'm not a pro
    Retired Defense Industry Engineer; Schluter 2.5-day Workshop Completed 2013, 2014

  3. #3
    Plumber jimbo's Avatar
    Join Date
    Aug 2004
    Location
    San Diego
    Posts
    9,001

    Default

    We would like a picture of the exact problem, but from what you said, soemthing very bad may happen very soon. This needs to be fixed.

  4. #4
    In the Trades Gary Swart's Avatar
    Join Date
    Sep 2004
    Location
    Yakima WA
    Posts
    7,246

    Default

    While you are at it, get a ball valve. That will shut the water off completely and easily. You are doing the right thing in NOT using the saddle valve as they are trouble waiting to happen.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •