(206) 949-5683, Top Rated Plumber, Seattle
Results 1 to 2 of 2

Thread: adjusting square d (9013 fsg-2)

  1. #1

    Default adjusting square d (9013 fsg-2)

    Hi I'm in need of help. I replaced the pump and had to do some re-configuring of the plumbing. I used the old squared D swith. I set every thing back up. For the most part it works, thank God.

    Here is my problem. The pump senses when its time to fill the tank, but sense when its time to turn the pump off after its full. After reading serveral websites, it seems that I need to measure the PSIs using a gauge. Unfornately the pump that I purchased does not have a gauge for me to determine whether I have enough pressure between the two settings. How do I compensate for this problem?

    Last edited by rj8214; 07-17-2007 at 05:39 PM.

  2. #2
    In the Trades Gary Swart's Avatar
    Join Date
    Sep 2004
    Yakima WA


    buy a gauge?


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts