Bell end pvc

Good morning. Just wondering if it matters which way the 'bell' end of the pipe is installed, upstream or downstream. This is 3/4" pvc from the meter to the house. Thanks for comment. Roshe

Doesn't really matter with a water supply line. The PVC primer and glue will chemically "weld" the joint, so it will be sealed permanently. If it were a drain line, the end of the pipe in the bell might tend to snag stuff coming at it, however. (Just my opinion.)
Mike

bell end

Just a point of reference. PVC S&D sewer pipe fitting are mostly bell ends on all the openings so at least one will always be "against" the flow.

Thanks for your responses. Got it in the ground and looking good. Roshe