sredmyer
New Member
- Messages
- 5
- Reaction score
- 0
- Points
- 0
I am on city water and have very low (at least I think it is) water pressure. I can barely run a single sprinkler (two is out of the question). I tried to connect a slip-n-slide for my grandson the other day and my pressure was so low I could not effectively wet the slide.
I built a simple pressure gauge to attach to my outside spigot and got only 32 psi with nothing using any water. I have read that average pressure should be between 40 and 60 psi. I have spoken with the neighbors and they say that they think their pressure is also very low (although they have not messured it).
So my question is what can I do about this.
Thanks for any suggestions,
Steve
I built a simple pressure gauge to attach to my outside spigot and got only 32 psi with nothing using any water. I have read that average pressure should be between 40 and 60 psi. I have spoken with the neighbors and they say that they think their pressure is also very low (although they have not messured it).
So my question is what can I do about this.
Thanks for any suggestions,
Steve