Valve Recommendation

Users who are viewing this thread

PitBull

New Member
Messages
3
Reaction score
0
Points
0
I need to replace the PVC globe valves in my existing water source heat pump installation. When adjusting the water flow rate I get a water turbulence and squealing noise. I have two valves in the system, one needs a 1GPM and the other 3GPM flow rate @50psi. I have tried 'dole' valves without success.

Any suggestions will be appreciated. :)
 

PitBull

New Member
Messages
3
Reaction score
0
Points
0
Fyi

I found gate valves to be the answer.... NO noise and good flow adjustment. :)
 

CHH

New Member
Messages
224
Reaction score
0
Points
0
Location
Denver, CO
Have you looked into manual balancing valves or differential bypass valves?
 
Top
Hey, wait a minute.

This is awkward, but...

It looks like you're using an ad blocker. We get it, but (1) terrylove.com can't live without ads, and (2) ad blockers can cause issues with videos and comments. If you'd like to support the site, please allow ads.

If any particular ad is your REASON for blocking ads, please let us know. We might be able to do something about it. Thanks.
I've Disabled AdBlock    No Thanks