Jeremytl
Scientist
Brief history: We had well tested two years ago before we bought house, it tested positive for total bacteria and negative for eColi. It was shock chlorinated and re-tested, with both negative results. We have lived there for 2 years and drink the water heavily, never have gotten sick. The well has NO treatment system of any kind. We have been using a brita filter, which I understand is the opposite of what we should be doing. So, we stopped using the brita filter.
Last week, I had the local county health department test my well for bacteria and inorganics. Inorganics results won't be back for a couple more weeks. Bacteria results are back ($50 for each analysis). Well tested positive for total bacteria and negative for e Coli. From what I understand after reading your previous comments, I should install a uv filter. I was also planning on installing a "whole house" filter b/c I know I have iron in excess. So, where should each of these filters go? I.e., which order, one before the other, after welltroll tank or before, between pump and welltroll, etc. etc. I have also heard of an under the sink "point of use" filter the guy from my county office told me about. By the way, nice as this guy was, he has been well sampling for 15 years but had limited knowledge about treatment options. I am on a budget and I anticipate I will be installing these filters myself (and the help of my kind father). So I basically need to know the layout and which brands I choose.
Other house info: Small house, 2 people, one bathroom. Shallow well (60') close to house, pump and welltroll tank under house. Septic tank located less than 100 feet away from well (1965 year built). I also have a question, while I am at it, about my septic tank but i'll post that in the appropriate section. Please know, you guys are very much appreciated!
Last week, I had the local county health department test my well for bacteria and inorganics. Inorganics results won't be back for a couple more weeks. Bacteria results are back ($50 for each analysis). Well tested positive for total bacteria and negative for e Coli. From what I understand after reading your previous comments, I should install a uv filter. I was also planning on installing a "whole house" filter b/c I know I have iron in excess. So, where should each of these filters go? I.e., which order, one before the other, after welltroll tank or before, between pump and welltroll, etc. etc. I have also heard of an under the sink "point of use" filter the guy from my county office told me about. By the way, nice as this guy was, he has been well sampling for 15 years but had limited knowledge about treatment options. I am on a budget and I anticipate I will be installing these filters myself (and the help of my kind father). So I basically need to know the layout and which brands I choose.
Other house info: Small house, 2 people, one bathroom. Shallow well (60') close to house, pump and welltroll tank under house. Septic tank located less than 100 feet away from well (1965 year built). I also have a question, while I am at it, about my septic tank but i'll post that in the appropriate section. Please know, you guys are very much appreciated!