5 days ago the pilot on our water heater went out. Initially I thought nothing of this because we had just had a 2 day wind storm.
I've had to re-light the pilot ~2/day since. It starts up fine, but seems to shut off with the burner once the water gets to temperature.
I've replaced the thermocoupler resulting in little or no change.
Can anyone give me advice on what could be causing this?
FYI: Its a State Select (8 years old), low boy, 40 Gal, Gas Burner.
Thanks,
Ruger
I've had to re-light the pilot ~2/day since. It starts up fine, but seems to shut off with the burner once the water gets to temperature.
I've replaced the thermocoupler resulting in little or no change.
Can anyone give me advice on what could be causing this?
FYI: Its a State Select (8 years old), low boy, 40 Gal, Gas Burner.
Thanks,
Ruger