(206) 949-5683, Top Rated Plumber, Seattle
Results 1 to 2 of 2

Thread: How to pick right size taco pump

  1. #1

    Default How to pick right size taco pump

    I'm going to have 3 separate pumps for 3 zones,BB hot water,gas. Do you establish a flow rate for each zone (f=Q/500 X 20) (http://www.taco-hvac.com/uploads/Fil...rculators.pdf). The f that you get,you are suppose to go to the chart and tells you the size of pipe. Is this pipe size the size that is suppose to go into the pump and or the pipe going out of the pump.

  2. #2
    In the Trades Bob NH's Avatar
    Join Date
    Oct 2005
    Location
    New Hampshire
    Posts
    3,307

    Default

    Quote Originally Posted by JOE1934
    I'm going to have 3 separate pumps for 3 zones,BB hot water,gas. Do you establish a flow rate for each zone (f=Q/500 X 20) (http://www.taco-hvac.com/uploads/Fil...rculators.pdf). The f that you get,you are suppose to go to the chart and tells you the size of pipe. Is this pipe size the size that is suppose to go into the pump and or the pipe going out of the pump.
    It is the size of the pipe/tubing in the circuit. In most cases the pump will be the same size but could be larger.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •