(206) 949-5683, Top Rated Plumber, Seattle
Results 1 to 6 of 6

Thread: Can I reuse my tub filler?

Hybrid View

  1. #1

    Default Can I reuse my tub filler?

    I have remodeled our master bath. The tub fill was in fine working condition. I want to change the layout of the knobs and spout. It is constructed with 1/2 copper sweated into the brass fittings. My question is this - can I "De-sweat" the fittings so I can move things around? If so - once I disassemble everthing, how do I propery "clean, sand, and flux" the brass joints.

    Am I better off cutting tubes and splicing onto the copper joints, leaving the copper/brass intact? (yea, would result in more joints than ideal)

    Thank you!

  2. #2

    Default

    Ok - so I read some other posts about copper joints... but this is the brass fitting (to copper).

    I unsweated the filler fitting. No problem. I used my inside wire brush and it seems to have worked, but the color of the brushed area is closer to the color of the solder than it is to brass. Is it normal for brass to lighten up in color or is that really just solder that's been brushed?

    What should I do?
    Thanks.

  3. #3

    Default Nevermind ;)

    on closer inspection, it's brass. I'm ready to re-sweat. Thanks anyway.

  4. #4

    Default Correction - mistake revealed

    Just in case anyone else has this question - the valve assemblies are factory soldered. I was able to remove the filler connection, but the other two could not be seperated. I had cut the copper tubes too close to the assembly... had I not, I could have reused the rough-in. Cost me $70 for a new roughin for the Moen filler.

    Good luck, hope this helps the next person!

  5. #5
    Plumber jimbo's Avatar
    Join Date
    Aug 2004
    Location
    San Diego
    Posts
    9,001

    Default

    Don't dispair over the money spent on the new valve. Although the old one may have been perfectly serviceable, many of us would consider it foolish to NOT replace the valve once the wall is open. This is a remodel which you will live with for 15 to 30 years! Why not start with all new material?

  6. #6

    Default

    Thanks, I feel better now.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •