brass toilet flange

Users who are viewing this thread

Canton

Plumber
Messages
66
Reaction score
0
Points
0
Location
Massachusetts
I just took out a 3" brass toilet flange, about 1 1/2" deep. When the new tiled floor goes down the brass flange won't be deep enough to fit down on the 3" copper. My question is do they make a deeper brass flange, if not can you pack and pour a cast iron flange on the copper?
 

Canton

Plumber
Messages
66
Reaction score
0
Points
0
Location
Massachusetts
Figured it out!

I ended up cutting the 3" copper back and using a proflex CK-33 with a pvc street 90 and I'm all set. I actually got a lot of help from this site by looking at different threads.
Thanks,
Jerry
 
Top
Hey, wait a minute.

This is awkward, but...

It looks like you're using an ad blocker. We get it, but (1) terrylove.com can't live without ads, and (2) ad blockers can cause issues with videos and comments. If you'd like to support the site, please allow ads.

If any particular ad is your REASON for blocking ads, please let us know. We might be able to do something about it. Thanks.
I've Disabled AdBlock    No Thanks