Delta shower diverter

Users who are viewing this thread

Brander

New Member
Messages
6
Reaction score
0
Points
0
I have a bathtub shower with a Delta Scald Guard control with a push-in diverter to switch the flow to the shower head. The diverter valve is not working properly, so some water continues to come out of the tub spout when the flow is diverted to the shower. Can anyone tell me if there is a repair or replacement kit available for the diverter valve? I don't know if my description is enough to go on but I can't determine a model number for the control.
Thanks, Brander
 

Brander

New Member
Messages
6
Reaction score
0
Points
0
Master Plumber Mark

Thanks for the info. Are the diverters universal fit or should I remove mine and take it in to the plumbing supply to get a match?
Thanks, Brander
 

Gary Swart

In the Trades
Messages
8,101
Reaction score
84
Points
48
Location
Yakima, WA
I just did a similar repair on my daughter's shower. I replaced all of the "guts" while I was at it. Cost is very reasonable. Always take the old parts with you just to be sure.
 

Brander

New Member
Messages
6
Reaction score
0
Points
0
Thanks, I will take the parts with me, but how do I look for a match, by manufacturer and comparing appearance?
 

colej55

New Member
Messages
1
Reaction score
0
Points
0
Location
ChattanoogaTN
I replaced mine, but there is no change in the water flow. About half of the water still pours out the tub spout. any ideas?
 
Top
Hey, wait a minute.

This is awkward, but...

It looks like you're using an ad blocker. We get it, but (1) terrylove.com can't live without ads, and (2) ad blockers can cause issues with videos and comments. If you'd like to support the site, please allow ads.

If any particular ad is your REASON for blocking ads, please let us know. We might be able to do something about it. Thanks.
I've Disabled AdBlock    No Thanks