Toilet for 10" rough-in but with requirements!

[fatdaddy]

I am tiling a friends bathroom and I think she has a 10" rough-in. I have not measured it exactly yet,but I think that is what she has.
She wants:

round bowl
ADA compliant
normal install (no skirt)
Toto if she can.

I have never installed the Uni-fit feature so advice is welcome re:that.
Water supply is,I am assuming,6" from center of waste pipe.Again,I have to double check.

Any toilets fit the above requirements?
Thanks in advance.

[jadnashua]

You may find a comfort height round toilet, but will find more elongated, as it takes elongated to be ADA. The unifit adapter only works on a select few toilets, and all of them are skirted, so it sounds like you don't have to worry about that. The Drake II is now available in a 10" rough-in, and I'd look over that on the www.totousa.com website to see if it meets her requirements. the Drake is a fine toilet - I put two in at my mother's house.

[fatdaddy]

Will do. Thanks.

[Peanut9199]

The Drake II is now available in a 10" rough-in, and I'd look over that on the www.totousa.com website to see if it meets her requirements. the Drake is a fine toilet - I put two in at my mother's house.

The Drake II is not available in a 10" rough-in, the Drake is and it's only elongated.

[Terry]

The Aquia comes in a 10" rough.
I just picked up four of them for stock.

Or the 10" Drake, CST744EF.10

Both of these are elongated with the Universal height bowls.

[Peanut9199]

I didn't realize the 10" Drake was Universal height, thanks (learn something new everyday).