(206) 949-5683, Top Rated Plumber, Seattle
Results 1 to 3 of 3

Thread: wax/neoprene ring for rear outlet/wall toilet

  1. #1

    Question wax/neoprene ring for rear outlet/wall toilet

    I'm looking for any advice on installing an American Standard Yorkville rear outlet toilet. It sits on the floor (no carrier bracket), but the outlet is out the back, with the drain centered 4" above the floor. The instructions show a standard flange, like a floor drain, but say to use a neoprene or graphite felt ring. I haven't been able to find such a ring at Home Depot. There was a foam ring, but it said it was for floor drains.

    Suggestions, advice???
    TIA.

  2. #2
    Retired Defense Industry Engineer jadnashua's Avatar
    Join Date
    Sep 2004
    Location
    New England
    Posts
    21,432

    Default

    Go to a plumbing supply house...
    Jim DeBruycker
    Important note - I'm not a pro
    Retired Defense Industry Engineer; Schluter 2.5-day Workshop Completed 2013, 2014

  3. #3
    Homeowner geniescience's Avatar
    Join Date
    Nov 2005
    Location
    humid summers hot, humid winters cold
    Posts
    2,152

    Default

    1-800-tech-support at the AS company will tell you where a specialty shop is. This is the place to go to. AS knows who has spare parts for their stuff.

    dadvid

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •