Kohler Rite-Temp 304 Shower Valve

Users who are viewing this thread

basementshower

New Member
Messages
2
Reaction score
0
Points
0
Hello,

I am having a weird problem with a Kohler Rite-Temp 304 shower valve. It was roughed in by a plumber and has been fine. I removed the valve to take the plaster ring off and when I reinstalled and it now the valve won't turn the water to the shower off. It runs the same no matter what the handle position. I made sure everything was seated right. I'm confused - I could see where you could install this 180 degrees off, but I flipped it and that didn't help. What did I do?

k-304-valve.jpg
 
Last edited by a moderator:

basementshower

New Member
Messages
2
Reaction score
0
Points
0
I got it. The o-rings for the hot and cold inlets had popped out when I removed the valve. I didn't see them (not working in the best light).

No leaks now!!!

k-304-r21.jpg
 
Last edited by a moderator:
Top
Hey, wait a minute.

This is awkward, but...

It looks like you're using an ad blocker. We get it, but (1) terrylove.com can't live without ads, and (2) ad blockers can cause issues with videos and comments. If you'd like to support the site, please allow ads.

If any particular ad is your REASON for blocking ads, please let us know. We might be able to do something about it. Thanks.
I've Disabled AdBlock    No Thanks