My water system is as follows:-
Water 0.75HP pump connected to the mains
Pressure tank
pressure switch set to 40/70 psi
I set it that way to keep the pump continously running during the shower with the tap FULLY OPEN to avoid that annoying sudden change of hot and cold water mixture when the pump turn on and off and cause pressure variation , and I am very happy with that setting for showering because the pressure would built up untill 60psi and stay constant during shower with the tap full open
The problem now is , when anybody uses water in the kitchen then the water mixture in the shower changes and I get hot and cold shocks again
Any ideas how to solve this problem?
I thought of fixing a pressure regulator in the home entrance and set it to 50psi , would that help?
Thanks in advance
Water 0.75HP pump connected to the mains
Pressure tank
pressure switch set to 40/70 psi
I set it that way to keep the pump continously running during the shower with the tap FULLY OPEN to avoid that annoying sudden change of hot and cold water mixture when the pump turn on and off and cause pressure variation , and I am very happy with that setting for showering because the pressure would built up untill 60psi and stay constant during shower with the tap full open
The problem now is , when anybody uses water in the kitchen then the water mixture in the shower changes and I get hot and cold shocks again
Any ideas how to solve this problem?
I thought of fixing a pressure regulator in the home entrance and set it to 50psi , would that help?
Thanks in advance