galvanized to abs dwv?

Users who are viewing this thread

fetchmore

New Member
Messages
2
Reaction score
0
Points
0
I need to remove the old 2" galvanized drain, trap and branch from my main stack. That will leave me with a cast iron 2" female npt. I would like to know what the best method would be for screwing in the new abs 2" male npt.
thank you
 

Markts30

Commercial Plumber
Messages
625
Reaction score
1
Points
0
Location
Phoenix, AZ
nohub.jpg


Go with PVC... (oersonal bias)
Buy a 6" Schedule 80 nipple and cut one ond off ,,,
Screw this nipple into the female cast iron and continue your waste using a coupling at the other end...
The SCH80 nipple is vastly stronger than any DWV male adapter...
 
Last edited by a moderator:
Top
Hey, wait a minute.

This is awkward, but...

It looks like you're using an ad blocker. We get it, but (1) terrylove.com can't live without ads, and (2) ad blockers can cause issues with videos and comments. If you'd like to support the site, please allow ads.

If any particular ad is your REASON for blocking ads, please let us know. We might be able to do something about it. Thanks.
I've Disabled AdBlock    No Thanks