I am posting this question for someone.
I have decided I need to replace my sad old pedestal pump.
Here is what I have chosen:
Zoeller N57
Verticalmaster switch
Zoeller 507 backup pump
My current hole is 11"x11"x21".
Can anyone give some advice on the minimum dimensions I need to have for the above installation?
I suspect I would be best served putting it in a sump basin; would you agree? Can I get a lid for it that will accept water coming in from above (say a sink leaked in the same room)?
For your info my basement is:
1680sq. feet
Distance from bottom of sump hole to the pipe head (before it turns 90' to exit the building into the gutter downpipe) is 8'5"
The distance from the head to the gutter downpipe is 6'.
If you think I may have underestimated using a 1/3hp model let me know that too.
Thanks,
Morris
I have decided I need to replace my sad old pedestal pump.
Here is what I have chosen:
Zoeller N57
Verticalmaster switch
Zoeller 507 backup pump
My current hole is 11"x11"x21".
Can anyone give some advice on the minimum dimensions I need to have for the above installation?
I suspect I would be best served putting it in a sump basin; would you agree? Can I get a lid for it that will accept water coming in from above (say a sink leaked in the same room)?
For your info my basement is:
1680sq. feet
Distance from bottom of sump hole to the pipe head (before it turns 90' to exit the building into the gutter downpipe) is 8'5"
The distance from the head to the gutter downpipe is 6'.
If you think I may have underestimated using a 1/3hp model let me know that too.
Thanks,
Morris