bathroom problems

Users who are viewing this thread

guresky73

New Member
Messages
1
Reaction score
0
Points
0
I recently replaced a t-joint on my water line outside. Everything is fine except that in one bathroom, the sink isn,t getting any water and the toilet isn,t getting anywater.the shower in there is fine and so is the rest of the house.There was a lot of rust running out of the other faucets and orange water. Could there be debris in my sink and toilets water inlet filters? I ran out of time and have not checked them. My house is old and has rust colored water sometimes,also there is always water breaks in my neighborhood.
thanks
 

Jadnashua

Retired Defense Industry Engineer xxx
Messages
32,770
Reaction score
1,190
Points
113
Location
New England
Was that T on galvanized steel pipe? In the process of removal, you probaby broke loose a bunch of rust. Try taking the areators off of the faucets and the screen in the showerhead and you might be back to "normal". You'll be needing to budget for a repipe in the future - that would get rid of the rusty water and restore flow.
 
Top
Hey, wait a minute.

This is awkward, but...

It looks like you're using an ad blocker. We get it, but (1) terrylove.com can't live without ads, and (2) ad blockers can cause issues with videos and comments. If you'd like to support the site, please allow ads.

If any particular ad is your REASON for blocking ads, please let us know. We might be able to do something about it. Thanks.
I've Disabled AdBlock    No Thanks