(206) 949-5683, Top Rated Plumber, Seattle
Results 1 to 2 of 2

Thread: manabloc hot water problem

  1. #1
    DIY Junior Member dmd's Avatar
    Join Date
    Feb 2011
    Location
    Tacoma, WA
    Posts
    1

    Default manabloc hot water problem

    Have 2 hot water ports on manifold that have no water pressure. Any ideas? The ports went to the washer. Switched from the original washer port to an unused port. The unused port worked for a few days and now it has gone dry.

  2. #2
    Moderator & Master Plumber hj's Avatar
    Join Date
    Aug 2004
    Location
    Cave Creek, Arizona
    Posts
    25,659

    Default

    well, you would not normally have TWO bad ports going to ONE washing machine. But the usual problem is in the connection at, or to, the washer, not the pipe to it.

Similar Threads

  1. tankless hot water and manabloc
    By johnporta1 in forum Plumbing Forum, Professional & DIY Advice, Tips & Tricks
    Replies: 1
    Last Post: 07-23-2010, 10:58 AM
  2. MANABLOC Water Temperature Issues
    By cdiesel27 in forum Plumbing Forum, Professional & DIY Advice, Tips & Tricks
    Replies: 0
    Last Post: 12-20-2009, 12:03 PM
  3. Wisbro PEX compatable with Manabloc?
    By bigwooo in forum Plumbing Forum, Professional & DIY Advice, Tips & Tricks
    Replies: 4
    Last Post: 09-25-2009, 05:51 AM
  4. manabloc woes
    By thri11a in forum Plumbing Forum, Professional & DIY Advice, Tips & Tricks
    Replies: 10
    Last Post: 07-24-2009, 11:44 AM
  5. HELP! Manabloc/PEX Problem
    By mamato2girls in forum Plumbing Forum, Professional & DIY Advice, Tips & Tricks
    Replies: 6
    Last Post: 05-28-2007, 05:00 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •