What Material for Sleeve Through Brick?

Users who are viewing this thread

homewrecker

New Member
Messages
6
Reaction score
0
Points
0
I need to run copper water supply pipes through a brick wall that is 10" thick. I want to bore a large enough hole to allow for a sleeve/conduit through which the copper pipe will run. What should this sleeve be made of? The next size copper pipe, or something harder, like iron pipe?

Seems like a copper sleeve could be warped if the surrounding brick cracked or moved. If I used iron, wouldn't I need an insulator between the dissimilar metals?

Thanks for your help!
 

hj

Master Plumber
Messages
33,600
Reaction score
1,037
Points
113
Location
Cave Creek, Arizona
Website
www.terrylove.com
pipe

If the wall moves enough to warp a piece of copper pipe, you have a bigger problem than what to use for a sleeve. PVC or ABS would give the protection without damaging the copper.
 

santanaf

New Member
Messages
31
Reaction score
0
Points
0
Mortar is acidic

If you are going to be doing anything with mortar to fill the hole after the pipe is run, realize that it is somewhat acidic and can corode the copper running through. Even using something like a thick cardboard cylinder (like a thick TP role almost) will protect the copper, but PVC or ABS within a rigid paper tube would be great.
 

homewrecker

New Member
Messages
6
Reaction score
0
Points
0
Thanks!

PVC was my first thought, but I wasn't sure if it was rugged enough. Thanks to you both for your advice!
 

Markts30

Commercial Plumber
Messages
625
Reaction score
1
Points
0
Location
Phoenix, AZ
Might want to consider buying some 10mil tape and putting a couple or three layers on the pipe - that should be sufficient...
 
Top
Hey, wait a minute.

This is awkward, but...

It looks like you're using an ad blocker. We get it, but (1) terrylove.com can't live without ads, and (2) ad blockers can cause issues with videos and comments. If you'd like to support the site, please allow ads.

If any particular ad is your REASON for blocking ads, please let us know. We might be able to do something about it. Thanks.
I've Disabled AdBlock    No Thanks