Great site btw...Thanks in advance for any help!
Now...Here's my dilema. I'm in the middle of installing a whirlpool tub. All rough in is complete. During my test run I had a small leak coming from the bottom of the drain. Not sure if it's coming from the Plug/Ell connection or from the Waste Tee/Ell connection. I've had this set up apart 10 separate times with no luck in stopping this (pita) leak. My bath drain is a American Standard Rotary w/Pop Up. I've doped up the threads on the plug and sealed the connection to the tee as well...no luck!!!
Any ideas as to what I'm missing?
Thanks again!
Now...Here's my dilema. I'm in the middle of installing a whirlpool tub. All rough in is complete. During my test run I had a small leak coming from the bottom of the drain. Not sure if it's coming from the Plug/Ell connection or from the Waste Tee/Ell connection. I've had this set up apart 10 separate times with no luck in stopping this (pita) leak. My bath drain is a American Standard Rotary w/Pop Up. I've doped up the threads on the plug and sealed the connection to the tee as well...no luck!!!
Any ideas as to what I'm missing?
Thanks again!
Last edited: