(206) 949-5683, Top Rated Plumber, Seattle
Results 1 to 10 of 10

Thread: Bad pump

Hybrid View

  1. #1

    Default Bad pump

    I got up this morning and my Shur-dri 3/4 HP jet pump was done. I think water got to it from all the rain the last few days. Of course everything is closed today, but Home Depot and the only pumps they had were Flotech pumps. I picked one up, but never good get it to prime. I took all the fittings off, put teflon tape on them to make sure the pump wasn't sucking air. No luck. I went through 3 gallons of water trying to prime it. My pressure tank is at 28 PSI with no water in it. Ani ideas?

  2. #2
    Previous member sammyhydro11's Avatar
    Join Date
    Dec 2006
    Location
    Massachusetts
    Posts
    709

    Default

    Burr,
    is it a shallow well jet pump or deep well jet pump? Priming can take time depending on how far your well is from the pump.

    SAM

  3. #3

    Default

    What was on it before was a 3/4 HP shallow well pump. I did not have the same trouble priming it about 5 years ago when I put it in.

    When I was trying to prime the Flotech yesterday it kept shutting off and coming back on continuously, but it never really shut off. If that makes sense.

  4. #4
    Plumber Cass's Avatar
    Join Date
    Nov 2005
    Location
    Ohio
    Posts
    5,984

    Default

    #1 Flotech is junk in my NSHO.

    #2 pump cycling can be a symptom of a bad pressure switch or tank.

    #3 The pumps can run on 240v or 120V. Is it set right.

    #4 was the box open when you purchased it?

  5. #5
    Previous member sammyhydro11's Avatar
    Join Date
    Dec 2006
    Location
    Massachusetts
    Posts
    709

    Default

    Cass is right,those pumps are junk and seeing that alot of places are now open,you might want to consider buying something better. It sounds to me,like cass said,you either have a bad tank,or you have a shut off that is closed on the discharge of that pump.That flow tech might be able to get you out of a jam but in the long run it will put your right back into one.

    SAM

  6. #6

    Default

    Yes the box was closed when I bought it. Thanks for the input. I am thinking about getting some professional help. And probably call some one on the plumbing too. Thanks again

  7. #7

    Default

    I wouldnt be so quick to brand and entire brand as junk, unless we are discussing harbor freights electric tools from Child-slavelabor.com

    Flotec is not the problem in this guys case - he has other problems that only a pro can solve. Maybe, and truly just maybe, the flotec will not last as long as the ???? brand. On a dollar for hour basis though, flotec just might win the race.

    Anyone that has been inside of a jet pump knows how few the components are and how little one can cheapen the construction process. The case moldings are not an issue. The impeller is the key but still typically a durable item. Flotec didnt make the motor, GE did in some tijuana sweat shop joint that supplies sta rite and jacuzzi too. The seals are made by yet another outfit and have yet to be degraded.

    By the way guys, if the pump cuts in and cuts out under pressure rise it is obviously primed and trying to go! Look toward solutions other than a name brand change.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •