(206) 949-5683, Top Rated Plumber, Seattle
Results 1 to 3 of 3

Thread: no water

Hybrid View

  1. #1

    Default no water

    Had no water yesterday. Found a busted PVC pipe out at the well and fixed it, but submersible pump was still not pumping. Pull the pump out and it wasn't working. Found a damaged wire causing no electricity to get to the pump. Replaced wiring and made sure pump was operating before putting it back down the well, still no water. My pressure tank is reading 0 lbs. I just replaced the pump maybe 8 months ago. The blatter in the pressure tank appears to be busted but this shouldn't stop the pump from pumping water, from what I understand. Could it be anything except a bad pump? Any ideas would be appreciated.

  2. #2
    That's all folks! Gary Slusser's Avatar
    Join Date
    Aug 2004
    Location
    Wherever I park the motorhome.
    Posts
    6,790

    Default

    You don't run a submersible well pump unless it is under water. The pigtail wiring may have burnt up; they need the cooling effect of the water and without it, it only takes a short period of power to ruin them. Or... you missed other open or shorts in the cable or don't have the cable to pigtails connected right; good joints. Or you don't have the right pump for the electrical supply or have the pigtails wired wrong. Check out
    www.franklinelectric.com (I think it is) for the ohms readings etc. to check the motor and cable for proper ohms and opens/shorts.

    Gary
    Quality Water Associates

  3. #3
    Moderator & Master Plumber hj's Avatar
    Join Date
    Aug 2004
    Location
    Cave Creek, Arizona
    Posts
    25,605

    Default pump

    The pump motor may have been running, but that does not always mean it will pump the water. You have to use an ammeter to see if the motor is running or not. If it is not, then you may have an electrical problem, assuming the motor is not burned out or going into an overload condition.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •