Need ideas for toilet models that fit 10" rough-in

[linmmc]

After reading all the reviews and comments on this site, we were ready to proceed with replacing all 3 of our constantly-clogging, contractor-grade Sterling toilets with Toto Drakes. Then we found out from our plumber that our master bath has a 10" rough-in and so this model won't fit. We're so disappointed! For now we are replacing the other two toilets and playing "wait-and-see" w/ the master bath. We did see other Toto models that can accommodate the 10" rough-in if we use something called a Uni-Fit adapter, but our plumber did not recommend this arrangement because it becomes another potential leaking point (extra joints/pieces, etc.) Can anyone share their experiences with Uni-Fit adapters - good or bad? Are there any other toilet models out there that can fit 10" without the adapter, and perform as well as the Toto Drake?

Thanks!

[Terry]

If your plumber has not seen a Unifit before, he will soon. There are too many being installed for him to not see one soon.

They work fine. The Toto Vespin uses one, a smooth sided toilet with Sanagloss in the bowl area.