mlfbellingham
New Member
- Messages
- 4
- Reaction score
- 0
- Points
- 0
Hi. I have a Myers pump, I think it is shallow well as it gets water from an underground cistern. I came home this morning to find the feeder tube that runs from the pump to the tank had come off the pump. There was water everywhere, and the pump was running and very hot but had lost all pressure. I reconnected the tube and turned the pump back on, but it just kept running with no change in pressure. So I disconnected it again. Should I just leave the pump to cool down and try again, or is there something else I should do? Please help, I am in Latin America and cannot get a plumber to look at it today.