Search:

Thanks again everyone for the input/info.

My house is a very old one, 121 years old now, and some previous owners were a little less than smart when it came to maintaining it. My wife and I are...

Here is a quick shot of the plate from the side of the compressor. It looks like no matter what a 20 Amp is under sized. Am I correct or just badly misreading things? Should I up it to 30 since...

Jim, thanks for the note. Actually, I do notice it happening more frequently during hot times, figured as much what you said but you have helped to confirm it. I will check the voltage at the comp...

Hello all,

I have my AC comp. with an outdoor disconnect (picture attached), and the darned fuses keep blowing. Have had problems on and off for a few years, every few weeks or months it would...

Sorry for my terminology mixup, I was thinking backflow preventer. This isn't in The Nati, but it northern OH, rural Cleveland area.

So given the proper backflow preventer valve, should this...

If you are going to be doing anything with mortar to fill the hole after the pipe is run, realize that it is somewhat acidic and can corode the copper running through. Even using something like a...

My father is a bit neurotic and paranoid when it comes to water infilatration and leaks throughout his house. I have fond memories as a boy of a Christmas Story like fight between he and the sump...

Speaking of being in the Cincinnati area and being sworn to secrecy.

My wife's family is from The Nati, and I went to College at Miami University. Seems many years ago, way back in W-W-2, my...

I have a similar situation with my clay waste line. It is a very old house, plumbing was put in around 1905. We have ivy running along the side of the garden wall (row house, small 15x100 lot),...

I am installing a hydro air coil in my attic and am running Pex up. The coil has 3/4 stubs for in/out. I have 1/2" pex I will be using for my radiant flooring application, and a Taco 007 IFC...

I am running some PEX from my basement to my attic to feed a hydro-air coil in my attic air handler. I would like to insulat the PEX as best as possible in the wall and in the attic space. The...

Hello,

I am going to be runnning some PEX in the wet wall to the attic for future use. The PEX is for the Hydro Coil that I will be installing on the attic air handler. I was planning on using...

Well, I just got off of the phone with the manufacturer and they confirmed what I had more or less planned.

Actually, I am going to be using 3/4" copper. The 3/4" copper is slight larger than...

Hello,

I have been posting some over at JohnBridge.com, but was recently directed here as most of my questions thus far involve plumbing and not yet tile.

That being said I am in the midst of...