Today I powered down the boiler for 15 seconds. Then after powering back up I could access the outdoor reset control parameters. I had originally hooked up the ODR without powering down.
Note...
|
|
|
Type: Posts; User: hillpc; Keyword(s):
power down the aquastat
Today I powered down the boiler for 15 seconds. Then after powering back up I could access the outdoor reset control parameters. I had originally hooked up the ODR without powering down.
Note...
I'm having the same problem. The L7248C aquastat...
I'm having the same problem. The L7248C aquastat doesn't seem to know that the ODR module is connected. Anti-short cycle timer and degrees F/C are the only other adjustable parameters besides high...
transformer gasket not enough to prevent indoor odors in direct vent?
Brand spanking new ThermoDynamics TDX90+ condensing boiler (it hasn't condensed anything yet) with Carlin EZPro burner and direct vent. Positive draft through the entire system (except for the 4"...
Well, the logic may be correct that firing up the...
Well, the logic may be correct that firing up the oil boiler every time someone tuns on a faucet (or keeping the boiler at temp just for hot water) is wasteful compared to other methods, but there's...
efficiency of +20 year old Weil-Mclain oil boiler P366(HE)?
The boiler with Beckett AF burner was here when I moved in. I assume
the HE stands for high efficiency, but what was that 20 years ago? I
could keep this boiler going for a long time, but wanted...