Terry Loves Bellevue & Kirkland
425-649-5683, Top Rated Plumber 1-877-808-5683

Search:

Type: Posts; User: haeffnkr; Keyword(s):

Search: Search took 0.32 seconds.

  1. Well..... I found someone on CL selling brand...

    Well.....

    I found someone on CL selling brand new Aquastar 240fx - just like my current unit.
    I figured for a good deal and the fact that this will drop right in to my current...
  2. I have a line on a N-0931M-ASME model. I have...

    I have a line on a N-0931M-ASME model.
    I have found out it is a 2007.11 model year.

    It is brand new, never installed and Stephanie at Noritz said it would have the full warranty available.
    She...
  3. I already have a 1 1/4 main going about 65-70...

    I already have a 1 1/4 main going about 65-70 feet then a 3/4" 5 foot run going to my existing tankless water heater.
    My meter is upgraded - 2 times actually... I have a pool heater to :) with a 2...
  4. richmond rheem and whoever else - Model: RTG-74 PVN -- make and opinions...

    Hello,
    I have an opportunity to purchase a used Model: RTG-74 PVN
    It is pictured as a Richmond Unit, but as I found below this is made by someone and imported by several manf. it seems.
    ...
  5. PIPE DOPE is the winner !! I took off the...

    PIPE DOPE is the winner !!

    I took off the teflon tape and put on some pipe dope and spun it right around !!

    It was not too tight and not too loose was not leaking a drop!

    thanks for the tips...
  6. Help - Mounting a hose bib on outside - no solder....

    Here is what I have going on....I am putting a hose bib on a basement wall, outside, on a walk out basement wall that is only 5.5 inches thick inside dimensions.
    So I am not using a freeze proof...
  7. I have all new construction in my new...

    I have all new construction in my new subdivision.
    I have 3/4 copper going through the wall and either plastic or copper going to the meter, I forgot which, but I saw it go in, no galvanized. The...
  8. thanks for all the replies, really appreciate it....

    thanks for all the replies, really appreciate it.

    I will research some expansion tanks and see about getting them installed.
    I have also looked at the Korky fill valves, will try to get some of...
  9. OK I can try to put in an expansion tank. Does...

    OK I can try to put in an expansion tank.
    Does it need to be mounted above the main line, upside down so to speak?

    The pressure is at 59 now, so I can not go down to 60?

    Any other ideas?
  10. Sorry forgot to mention it only hammers when...

    Sorry forgot to mention it only hammers when filling and shutting off.

    So the arrestors on the main line or probably not doing anything? or could they be helping some....at least the hammering...
  11. Long one - Need the "hammer" and tank(less) experts please

    Hello,
    I have been searching for an hour now and still have a few questions.

    I have a 4 year old Ranch house, I have over the last 2 months or so developed an increasing water hammer problem with...
Results 1 to 11 of 11