i would check the water pressure
|
|
|
Type: Posts; User: worsnup; Keyword(s):
i would check the water pressure
i love the toilet
the brass fitting is wall hung tank connection
the one to the left is a vent
you can put it on a CI 4'' footed p-trap
you wont be to happy with the cleaning end of it though...
i wonder how much the CEO of pg&e took home last year? what was that fat bonus for all the cost cutting implementations he approved to to satisfy some fat corporate parasites!
a scale drawing is needed as well as fixture count and location
your not a plumber until you get a little in your mouth.... oh ya.... simple green
its a two part handle the ''4 point metal star'' is part of the handle and is corroded to the stem pull wiggle pull wiggle pull puulll
i love cinch clamps
the refill tube? the refill tube refills the bowl to a proper level after each flush. if it is not working--- you flush the toilet and it flushes but leaves bowl level is low-- so when you flush...
you have plastic or pex water system, its algae and its common in plastic systems in phoenix
in phoenix we live with it
its called a hub bushing goes in the clay hub (female end) its just a gasket you should look for one that is clay x pvc
stay way from the rubber coller flange they suck there are holes in your repair flange to bolt it to the floor just neeed a drill 1/4" masonary bit and i like mushroom head lead ancors
ployseamseal...
a few more pics could help
i would flip the street 90s and go with a hub flange
if the back wall is at the top of the pic
then maybe a 45 with a 45 flange
hard to say
you should run two 2" lines back to the 4'' to prevent suds in the sink
check for gfci outlets
im with jimbo you need to look into whats called reverse return piping methods when you use two or more heaters
u have to open the wall and move the san tee to proper level
yes, toss in a fluid master 400-a or replacement fill valve of your liking
there are valves that are built to be out side in your conditions "watts"with z3 suffix use all brass body's and stainless steel hardware
Phoenix whent to ipc last year
you have two basic methods one is time and material the other is flat rate.
time and material is just what it says
flat rate is lump sum
included in the price is the time for travel time to...