Thanks for your response DonL,
Could it be the dimmer even if when I turn on the lights with a normal switch on the circuit the low voltage lights still flicker? Remember there are 3 normal...
|
|
|
Type: Posts; User: davidwie; Keyword(s):
Thanks for your response DonL,
Could it be the dimmer even if when I turn on the lights with a normal switch on the circuit the low voltage lights still flicker? Remember there are 3 normal...
Hoping someone can give me some ideas on a flickering light situation. Here is the background:
*
On a single circuit I have 6 low voltage lights and 6 line voltage high hats. They are all...
Thanks for your response!
Thank you for your responses. I will look at the tankless option and make sure the GPM will work at the temperature rise I need. I'll connect it only to the Jacuzzi to save on energy costs.
I am probably off on the temperatures then. Let's just assume I need a 20 degree rise for the bath. What are the suggested options?
I have a geothermal system for my heating, air, and hot water.
The hot water temperature can only be brought up to 115 degrees F which is not hot enough for the wife to take a bath. I am building...
I have a 1/2 copper hot and cold water supply line to my shower where I want to install two shower heads. One head is a standard and the other head has 4 jets...
I definitely do not have enough room to put the wye fitting vertically onto the shower drain. I could put it horizontal with a slight up-angle towards the back wall. Is that not good enough?
Thanks for your response. I posted a picture with the vent line and fittings drawn-in. Can you please confirm this is what you were referring to?
The vertical line connects to the same vent as the...
Looking for some advice on venting a shower. In photo "IMG00009.jpg" you will see the horizontal drain line. The right vertical line is the vent stack. The left vertical is the drain for the sink. Is...