(206) 949-5683, Top Rated Plumber, Seattle

Search:

Type: Posts; User: monkeystomach; Keyword(s):

Page 1 of 2 1 2

Search: Search took 0.16 seconds.

  1. Here is the drawing with the sink and trap... the...

    Here is the drawing with the sink and trap... the trap for the W/M standpipe will be inside the wall and the trap for the sink will be outside the wall under the sink...
    ...
  2. Actually... do I even need to add a new vent pipe...

    Actually... do I even need to add a new vent pipe to the current vent? Or can I just add the new drain? Does that depend on the distance the new drain will be from the current stack?


    Thanks,
    ...
  3. would adding what is in red in this crude drawing...

    would adding what is in red in this crude drawing work?

    http://farm7.static.flickr.com/6083/6128574501_2d2ac32f22_z.jpg
  4. What if I remove the in-wall p-trap and then...

    What if I remove the in-wall p-trap and then plumb everything like a regular sink setup.

    Then i would do something like this...

    http://farm7.static.flickr.com/6210/6128140553_efd480a899_z.jpg
  5. http://farm7.static.flickr.com/6181/6125503274_03c...

    http://farm7.static.flickr.com/6181/6125503274_03c9024507_z.jpg

    So this is my current drain situation. It is 2" with a 1.5" vent on the right. Since I am going with a front loader and I want all...
  6. Thanks guys. I checked my local code and cannot...

    Thanks guys. I checked my local code and cannot find anything about the height of the standpipe. The instructions for the washer say it needs to be 18" high, I will probably do about 30". Once I...
  7. Add Sink Beside Washer and Move Supply Valves

    Hello,

    I currently have a front load washer and a front load dryer in my utility room connected to a “classic” washing machine water supply/drain box. This box was intended for a top load machine...
  8. Kitchen Sink... No Vent? Plus Moving Plumbing

    Hi Everyone,

    The below pictures are of my (old) kitchen sink setup. To me there appears to be no vent. The picture from below the house seems to show the same thing because the 3" pipe that...
  9. Replies
    10
    Views
    3,021

    hj... i was going to do exactly that......

    hj... i was going to do exactly that... disconnect the 1.5" drain from the horizontal wye, run it to the wall and then connect it to the vertical 3" drain using a new wye.... however this will not...
  10. Replies
    10
    Views
    3,021

    anyone...?

    anyone...?
  11. Replies
    10
    Views
    3,021

    Can I use one of these? I would put it...

    Can I use one of these? I would put it vertically against the back wall, connect the tub/sink drain to the 2" side inlet (using a 2" to 1 1/2" flush bushing), I would connect the closet flange with...
  12. Replies
    4
    Views
    1,909

    Toilet Supply Size From Wall...

    Sorry I'm not sure of the correct terms, but I'll try my best to explain.

    The current setup that I have running to the toilet is 1/2 copper to 3/8 drop ear elbow in the wall... then a 3/8 pipe to...
  13. Replies
    10
    Views
    3,021

    Hi HJ, Thanks for the suggestion,...

    Hi HJ,

    Thanks for the suggestion, unfortunately I cannot find the "street wye" fitting anywhere in my area. Would the plan that I stated above work, or is it seriously flawed?
  14. Replies
    10
    Views
    3,021

    http://farm6.static.flickr.com/5217/5405809417_c94...

    http://farm6.static.flickr.com/5217/5405809417_c9425313fb_z.jpg

    http://farm6.static.flickr.com/5172/5405809631_d0bd537f13_z.jpg
  15. Replies
    10
    Views
    3,021

    Relocating Closet Flange Help

    Hi Everyone; I need your help in relocating a closet flange. The current flange is a little over 14” from the finished wall, and I need it to be 12”, plus I need to move it over 3”. The biggest...
  16. Replies
    16
    Views
    1,864

    Thank you all for putting up with my silly DIY...

    Thank you all for putting up with my silly DIY questions, I really appreciate it. I hope this will be my last question…

    How do I remove the soldered joints? I will replace all of the copper to...
  17. Replies
    16
    Views
    1,864

    If I have a ring of solder around the joint and I...

    If I have a ring of solder around the joint and I re-heat the joint will the solder just flow into it? Or will it not work because there is no flux?
  18. Replies
    16
    Views
    1,864

    Thanks guys... what about my other joints that...

    Thanks guys... what about my other joints that seem to be okay, is there a possibility they have been contaminated too and need to be redone? Will they fail prematurely?
  19. Replies
    16
    Views
    1,864

    I cleaned and prepped the heck out of those...

    I cleaned and prepped the heck out of those fittings and end... everything was so shiny and pretty. I tried my best to heat the fittings and not the pipe too...
  20. Replies
    16
    Views
    1,864

    Soldered Joint Faulire Rate?

    So I tried all afternoon to solder some copper pipes to a new valve and hook that up to my existing plumbing. I practiced sweating copper yesterday and it was so easy and I did a great job... but...
  21. Replies
    5
    Views
    1,012

    Thanks guys. I do know where the valve is...

    Thanks guys.

    I do know where the valve is going to go, I just wasn't sure of the exact depth. So in order to get the right depth should I take 1/2 drywall and the tile, temporary hold it near the...
  22. Replies
    5
    Views
    1,012

    Solder or Thread Pipes to Valve?

    Hi Everyone,

    I am going to install a new Kohler 304 valve. I had planned on soldering all the pipes (1/2” copper) to the new valve… should I continue with that plan or can I thread everything...
  23. Replies
    11
    Views
    2,089

    http://i138.photobucket.com/albums/q276/monkeystom...

    http://i138.photobucket.com/albums/q276/monkeystomach/0723001821a.jpg
    http://i138.photobucket.com/albums/q276/monkeystomach/0723001821.jpg

    sorry for the cell phone pics, but they are better than...
  24. Replies
    11
    Views
    2,089

    some more... ...

    some more...

    http://i138.photobucket.com/albums/q276/monkeystomach/0723001822a.jpg
    http://i138.photobucket.com/albums/q276/monkeystomach/0723001822.jpg...
  25. Replies
    11
    Views
    2,089

    More Pics...

    Hi guys.
    Before I put the last few screws and clamps on the pipe system and put up the drywall I just wanted to check again on the cold water pipe (on the right) to make sure that it is okay and...
Results 1 to 25 of 27
Page 1 of 2 1 2