Search:

Attached is the pics per Hammerlane's request.
Thank you for all the replies.

My attempt to replace a hose bibb (3/4") was not successful due to very tight access to the connecting pipe ( attachment hose.bibb.JPG.) Luckily, the other side of the wall is the garage. After...

Thanks for all the replies. I will look into the Delta valves, and see if there is one model with an escutcheon that cover the existing cut-out. I do like the 34436 when it doesn't drip (water...

John, I bought a set of deep sockets from Walmart; and was advaced to use a hammer to tap (slight whack) to the socket wrench handle. Before the attempt, I too was concern whether too much torque...

Reference: "Leaking Grohe model 34-446" (URL http://www.terrylove.com/forums/showthread.php?t=451&highlight=grohe)

My 34-436 developed a temperature stuck-at symptom early this year. Per Grohe's...

I'd like to update the forum that the stuck cartridge has been taken out and replaced by the new one. Grohe's technical support provides a lot of help and good advice. Wrench doesn't work for me. A...

My 34436 has exhibited the temperature stuck-at symptom as indicated in the post "Grohe 34 436 Temp Problem" by Tom94024. Grohe's tech support recommends replacing the thermoelement cartridge. I...

KT444,
I happen to have a socket deep enough to use the wrench to take out the stope valve.

After some tinkering, I was able to access the stop valve, and find that the
filter is a piece of wire mesh wrapped around the middle of the valve stem.
The filter is cloaked with debris. After...

I bump into this thread while researching how to trouble shoot a recently developed weak water flow from a grohe 34436 valve. I have eleminated any blockage in the hand shower head and flex host....