Search:

I want to thank everybody that replied to my post...Because the area where the pump and tank are located.... I ended up changing the circuit breaker the running capacitor...and the pressure...

I have taken voltage readings and I'm getting voltages on the valve...the relay on the valve is closed so it is calling for the pump to turn on...I dont feel or hear and water running ....please help...

I want to thank everyone .... the size of the tailpiece was 5/8...I went to 7/8 and also over the years of doing dishes by hand I had a restriction in the drain of grease and stuff...after using the...

jimbo-- thanks -- So I take it that water is not supposed to come out---I'll get to the real plumbing supply and get a 7/8" inlet tailpiece and hose --- there is no kink in the hose--so that is got...

I just installed a new install dishwasher, ran eledtricity new shut off for water and put in a new drain inlet with no disposal.
everything is working well BUT when the dishwasher rinses. I hear...

thank for the info ==I tried the gfi outlet but I was getting to much hum. I have used this setup in other settings . I guess Im pulling wires for the weekend...again thanks

hello all,
I have had great advice from this site and I need it again.
I have a two wire outlet in the attic . I have guitar amp that I want to put there. The amp has three prongs . Since running...

Again I wanted to thank everyone who responded to my cry of help.
Now I need advice=my wife wants to do a lite bathroom redo and that means getting a toilet and cabinet and lights. cabinets and...

I was helping a friend rewire a dead thermostat--we rewired the the new thermostat it only had four wires for the old one and we put the wires where the color are supposed to go..but the air...